A compact 30 mm dot for high-count installations: three high-brightness 3535 RGB LEDs, the MT26803 TTL 4-wire driver and a fully potted IP68 housing. It is the lowest-cost way to cover a large area with individually addressable pixels — club ceilings, stage sets, signage and decorative runs where hundreds or thousands of dots are needed.
Key features
- 3 x high-brightness 3535 RGB LEDs in a 30 mm housing
- MT26803 TTL 4-wire driver with built-in program, 8-bit / 256 levels, 2 KHz
- 0.7 W max / 0.5 W average, 12 V DC
- Fault-tolerant data chain; single-colour version uses 6 x 2835 at 1 W, 24 V
- IP68 potted housing for indoor and outdoor decorative use
Technical specification
| Model | LED | Driver IC | Protocol | Grey Scale | Refresh | Max Power | Avg Power | Voltage | IP |
|---|---|---|---|---|---|---|---|---|---|
| F30RGB (4-wire) | High-brightness 3535 RGB x3 | MT26803 | TTL zero-code, built-in program | 8-bit / 256 | 2 KHz | 0.7 W | 0.5 W | DC12V | IP68 |
| F30-Single colour | High-brightness 2835 x6 | — | — | — | — | 1 W | — | DC24V | IP68 |
Applications
Building facades and media walls, bridge and skyline outlines, theme parks, stage and nightclub decoration, signage and architectural accent lighting.
Why choose us
All pixel dots and mesh screens are assembled in our own factory with Epistar, Philips and San’an LEDs, UCS512 / SM17500 / MT-series drivers, and tested dot by dot before packing. OEM branding, custom pitch, custom cable length and project-specific colour temperatures are available.
