This mesh screen uses high-voltage lamps on a low-current 24 V bus, so brightness and colour mixing stay consistent while power travels much further: 200 dots on one end for the DMX512 version and 280 dots for the TTL version, with no visible colour difference along the run. That means fewer power supplies, thinner cable and less installation labour on tall facades and wide curtain walls.
Key features
- 24 V high-voltage, low-current architecture: 200 dots (DMX512) or 280 dots (TTL) per single-end feed
- DMX512-1990 with UCS512CBL, 16-bit / 65,536 grey levels, 16 KHz refresh
- TTL 4-wire with MT1875B, 8-bit / 256 levels, 2 KHz, fault-tolerant data chain
- 0.76 W RGB / 0.96 W RGBW max, 0.5 W average per dot
- IP68 sealed mesh panel, custom pitch, size and density
Technical specification
| Model | LED | Driver IC | Protocol | Grey Scale | Refresh | Max Power | Avg Power | Voltage | IP |
|---|---|---|---|---|---|---|---|---|---|
| 512RGB / RGBW | High-voltage 3535 RGB x2 / + high-voltage Philips white x1 | UCS512CBL | DMX512-1990 | 16-bit / 65,536 | 16 KHz | 0.76 W / 0.96 W | 0.5 W | DC24V | IP68 |
| TTL 4-wire RGB | High-voltage 3535 RGB x2 | MT1875B | TTL zero-code, fault tolerant | 8-bit / 256 | 2 KHz | 0.76 W | 0.5 W | DC24V | IP68 |
Applications
Transparent LED mesh screens for building glass curtain walls, shopping mall atriums, stage backdrops, exhibition booths and outdoor media facades.
Why choose us
All pixel dots and mesh screens are assembled in our own factory with Epistar, Philips and San’an LEDs, UCS512 / SM17500 / MT-series drivers, and tested dot by dot before packing. OEM branding, custom pitch, custom cable length and project-specific colour temperatures are available.
