24V High Voltage DMX512 UCS512CBL RGB RGBW 3cm Pixel Dot Light IP68 Point Light

24 V high-voltage 30 mm pixel dot light, UCS512CBL DMX512 driver, 2 x high-voltage 3535 RGB LEDs, 0.76 W / 0.96 W, 16-bit, 16 KHz, IP68.

Why Us?

  • High Quality
  • Quick Response
  • Reasonable Price

The B series runs high-voltage LEDs on a 24 V DC bus, which cuts the current per dot and lets a single feed carry far more pixels than a 12 V system — fewer power supplies, thinner cable, faster installation. The 3 cm version uses two high-voltage 3535 RGB LEDs with UCS512CBL for 16-bit DMX512 video; the TTL 4-wire variant uses MT1875B for effects at lower cost.

Key features

  • High-voltage LED, low-current 24 V design — longer runs on thinner cable
  • UCS512CBL DMX512-1990 driver, 16-bit / 65,536 grey levels, 16 KHz refresh
  • 2 x high-voltage Epistar 3535 RGB; RGBW adds 1 high-voltage white LED
  • 0.76 W RGB / 0.96 W RGBW max, 0.5 W / 0.65 W average
  • TTL 4-wire (MT1875B) version available; IP68 potted housing

Technical specification

Model LED Driver IC Protocol Grey Scale Refresh Max Power Avg Power Voltage IP
F30B-512RGB High-voltage Epistar 3535 RGB x2 UCS512CBL DMX512-1990 16-bit / 65,536 16 KHz 0.76 W 0.5 W DC24V IP68
F30B-512RGBW High-voltage 3535 RGB x2 + high-voltage Philips white x1 UCS512CBL DMX512-1990 16-bit / 65,536 16 KHz 0.96 W 0.65 W DC24V IP68
F30B-RGB (4-wire) High-voltage Epistar 3535 RGB x2 MT1875B TTL zero-code, fault tolerant 8-bit / 256 2 KHz 0.76 W 0.5 W DC24V IP68

Applications

Building facades and media walls, bridge and skyline outlines, theme parks, stage and nightclub decoration, signage and architectural accent lighting.

Why choose us

All pixel dots and mesh screens are assembled in our own factory with Epistar, Philips and San’an LEDs, UCS512 / SM17500 / MT-series drivers, and tested dot by dot before packing. OEM branding, custom pitch, custom cable length and project-specific colour temperatures are available.

Scroll to Top
Share to...