A modular LED mesh screen built from unit panels that bolt together on site, which removes most of the installation difficulty of a custom screen. Each 3535 RGB lamp is triple-protected and double-side potted with a structural seal, so the panel genuinely reaches IP68. The dot and the support bar are one moulded piece, so the grid stays rigid and the pitch stays even. Choose the 16-bit point-by-point DMX512 scheme (UCS512CBL) for full video, or the 8-bit forwarding scheme (SM17500 + MT1875A) for cost-sensitive projects.
Key features
- Unit-panel design — assemble on site, no custom steel frame needed
- 3535 RGB lamps, triple protection, double-side potting + structural sealing: real IP68
- Dot and support bar moulded as one piece for a rigid, even grid
- Point-by-point DMX512 (UCS512CBL, 16-bit, 16 KHz) or forwarding DMX512 (SM17500 + MT1875A, 8-bit, 2 KHz)
- 0.76 W max / 0.5 W average per dot, 12 V DC, custom pitch and density available
Technical specification
| Model | LED | Driver IC | Protocol | Grey Scale | Refresh | Max Power | Avg Power | Voltage | IP |
|---|---|---|---|---|---|---|---|---|---|
| 512RGB point-by-point | Epistar 3535 RGB x3 | UCS512CBL | DMX512-1990 | 16-bit / 65,536 | 16 KHz | 0.76 W | 0.5 W | DC12V | IP68 |
| 512RGB forwarding | Epistar 3535 RGB x3 | SM17500 + MT1875A | DMX512-1990 | 8-bit / 256 | 2 KHz | 0.76 W | 0.5 W | DC12V | IP68 |
Applications
Transparent LED mesh screens for building glass curtain walls, shopping mall atriums, stage backdrops, exhibition booths and outdoor media facades.
Why choose us
All pixel dots and mesh screens are assembled in our own factory with Epistar, Philips and San’an LEDs, UCS512 / SM17500 / MT-series drivers, and tested dot by dot before packing. OEM branding, custom pitch, custom cable length and project-specific colour temperatures are available.
